Home > VFD Variable Frequency Drive >

220V 380v 7.5KW 10HP Single Phase Motor Vfd Drive Variable Frequency Device

Product Categories

Single Phase Solar Pump Inverter [53]
3 Phase Solar Pump Inverter [80]
MPPT VFD Solar Pump Inverter [82]
Solar Water Pump Controller [52]
VFD Variable Frequency Drive [129]
Variable Frequency Inverters [71]
PMSM Inverter [32]
Inverter Input 220v Output 380v [11]
Motor Soft Starter [32]
Inverter Reactor [12]
VFD Braking Resistor [12]
VFD Filter [11]

Shenzhen Veikong Electric Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

220V 380v 7.5KW 10HP Single Phase Motor Vfd Drive Variable Frequency Device

Ask Lasest Price
Brand Name :	VEIKONG
Model Number :	VFD500
Certification :	CE, ROHS
Price :	Please contact quotation
Payment Terms :	T/T, Western Union, L/C
Supply Ability :	1000 units per week
Delivery Time :	depends on quantities

Add to Cart

Product Details
Company Profile

220V 380v 7.5KW 10HP Single Phase Motor Vfd Drive Variable Frequency Device

220V 380v 7.5KW 10HP VFD with vector control ac drive frequency inverter

Product Advantage

1. Our VFD-500 series is vector control, it can run very accurately with faults less than 0.5%.

2. It has perfect protection, for example, over voltage, over current protection, especially the groud protection.

3. It has the optimized algorithm which is easy to use, even those who don't have a good knowledge of Vfd also can operate it without any problems.

4. We were also certificated by the European standard, such as the CE, ISO9001.....

5. If all these still can not fullfil the requirement of our customers, we have the excellent R&D team can design the software program according to your requirement.

Item		Specifiation
Input	Inuput Voltage	1phase/3phase 220V:200V～240V 3 phase 380V-480V:380V～480V
	Allowed Voltage fluctuation range	-15%～10%
	Input frequency	50Hz / 60Hz,fluctuation less than 5%
Output	Output Voltage	3phase:0～input voltage
	Overload capacity	General purpose application:60S for 150% of the rated current Light load application:60S for 120% of the rated current
Control	Control mode	V/f control Sensorless flux vector control without PG card(SVC) Sensor speed flux vector control with PG card (VC)
	Operating mode	Speed control,Torque control(SVC and VC)
	Speed range	1:100 (V/f) 1:200( SVC) 1:1000 (VC)
	Speed control accuracy	±0.5% (V/f) ±0.2% (SVC) ±0.02% (VC)
	Speed response	5Hz(V/f) 20Hz(SVC) 50Hz(VC)
	frequency range	0.00～600.00Hz(V/f) 0.00～200.00Hz(SVC) 0.00～400.00Hz(VC)
	Input frequency resolution	Digital setting: 0.01 Hz Analog setting: maximum frequency x 0.1%
	Startup torque	150%/0.5Hz(V/f) 180%/0.25Hz(SVC) 200%/0Hz(VC)
	Torque control accuracy	SVC:within 5Hz10%,above 5Hz5% VC:3.0%
	V/f curve	V / f curve type: straight line, multipoint, power function, V / f separation; Torque boost support: Automatic torque boost (factory setting), manual torque boost
	Frequency giving ramp	Support linear and S curve acceleration and deceleration; 4 groups of acceleration and deceleration time, setting range 0.00s ~ 60000s
	DC bus voltage control	Overvoltage stall control: limit the power generation of the motor by adjusting the output frequency to avoid skipping the voltage fault; Undervoltage stall control: control the power consumption of the motor by adjusting the output frequency to avoid yaw failure VdcMax Control: Limit the amount of power generated by the motor by adjusting the output frequency to avoid over-voltage trip; VdcMin control: Control the power consumption of the motor by adjusting the output frequency, to avoid jump undervoltage fault
	Carrier frequency	1kHz～12kHz(Varies depending on the type)
	Startup method	Direct start (can be superimposed DC brake); speed tracking start

	Stop method	Deceleration stop (can be superimposed DC braking); free to stop
	Maincontrol function	Jog control, droop control, up to 16-speed operation, dangerous speed avoidance, swing frequency operation, acceleration and deceleration time switching, VF separation, over excitation braking, process PID control, sleep and wake-up function, built-in simple PLC logic, virtual Input and output terminals, built-in delay unit, built-in comparison unit and logic unit, parameter backup and recovery, perfect fault record,fault reset, two groups of motor parametersfreeswitching, software swap output wiring, terminals UP / DOWN
Function	Keypad	LED Digital keyboard and LCD keypad(option)
	Communication	Standard: MODBUS communication CAN OPEN AND PROFINET( IN DEVELOPMENT)
	PG card	Incremental Encoder Interface Card (Differential Output and Open Collector), Rotary transformer Card
	Input terminal	Standard: 5 digital input terminals, one of which supports high-speed pulse input up to 50kHz; 2 analog input terminals, support 0 ~ 10V voltage input or 0 ~ 20mA current input; Option card: 4 digital input terminals 2 analog input terminals.support-10V-+10V voltage input
	Output terminal	standard: 1 digital output terminal; 1 high-speed pulse output terminal (open collector type), support 0 ~ 50kHz square wave signal output; 1 relay output terminal(second relay is an option ) 2 analog output terminals, support 0 ~ 20mA current output or 0 ~ 10V voltage output; Option card: 4 digital output terminals
Protection	Refer to Chapter 6 "Troubleshooting and Countermeasures" for the protection function
Environment	Installation location	Indoor, no direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt.
	Altitude	0-3000m.inverter will be derated if altitude higher than1000m and rated output current will reduce by 1% if altitude increase by 100m
	Ambient temperature	-10°C~ +40°C,maximum 50°C (derated if the ambient temperature is between 40°C and 50°C)Rated output current decrease by 1.5% if temperature increase by 1°C
	Humidity	Less than 95%RH, without condensing
	Vibration	Less than 5.9 m/s² (0.6 g)
	Storage temperature	-20°C ~ +60°C
Others	Installation	Wall-mounted, floor-controlled cabinet, transmural
	Protection level	IP20
	cooling method	Forced air cooling
EMC	CE ROHS	Internal EMC filter Complies with EN61800-3 Category C3 3^rd Environment

Replace famous brands vfd in general application.

220V 380v 7.5KW 10HP Single Phase Motor Vfd Drive Variable Frequency Device

VEIKONG VFD500 application picture:
220V 380v 7.5KW 10HP Single Phase Motor Vfd Drive Variable Frequency Device

Product Tags:


*From:	Your email address is incorrect!
*To:	Shenzhen Veikong Electric Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!